ibidi Heating System, Multi-Well Plates for Nikon Ti-S-E and Ti-S-ER

Key Features

Heating system for the Nikon Ti-S-E and Ti-S-ER Motorized Stage which hold multi-well plates (for low magnification only)

  • Permits the user to control the temperature of samples held in multi-well plates
  • Excellent illumination of the sample – no condensation due to heated top plate, and suitable for DIC
  • Ideal for live cell imaging applications – full incubator conditions on the microscope
  • System includes: ibidi Temperature Controller, Heated Plate for Multi-Well Format on a Nikon Ti-S-E or Ti-S-ER Motorized Stage, Heated Lid

System includes:


ibidi Temperature Controller

Heated Plate with Heated Glass Bottom


Heated Glass Lid, Multi-Well Plates

Special Requirements?

Description

Applications:

Rat fibroblasts (cell line)

Specifications ibidi Heating Systems, Multi-Well Plates:

Temperature Controller
Environmental humidity Relative humidity 0% – 99%
Environmental temperature +5°C – +40°C (50% rel. humidity)
Dimensions (H x W x D in mm) 90 x 170 x 230
Weight 3.4 kg
Input voltage 230 V / 50 Hz | 115 V / 60 Hz

Please Note:
These Heating Systems only fit K-Frame Stages and the Nikon Ti-S-E and Ti-S-ER Motorized Stages. For versions to fit other microscopy stages, please contact ibidi directly.

Heated Plate and Heated Lid For K-Frame Stages (160mm x 110mm) For Nikon Motorized Stages
Dimensions Heated Plate (in mm) 160 x 110 x 9 236 x 155 x 8
Dimensions Heated Lid (in mm) 160 x 108 x 25 160 x 108 x 25
Height of the System 30 mm (25 mm from microscope stage) 30 mm (22 mm from microscope stage)
Weight of Heated Plate 220 g 400 g
Weight of Heated Lid 210 g 210 g
Gas inlet Luer connector (M5 thread) with Luer Lock Luer connector (M5 thread) with Luer Lock
Restrictions for Objective Lenses

> 1 mm working distance for coverslip bottom
plates, e.g., ibidi µ-Plate 96 Well
> 2 mm working distance for thick bottom
plates

> 1 mm working distance for coverslip bottom
plates, e.g., ibidi µ-Plate 96 Well
> 2 mm working distance for thick bottom plates

Custom Openings On request On request

Compatibility to Microscopes
Nikon Ti-S-E, Ti-S-ER, TI2-S-SE-E, and TI2-S-SS-E Stages
ASI MS 2000 Series
PZ 2000 Series
Leica K-Frame Opening (160x110mm)
LUDL BioPrecision 2 Inverted
Biopoint 2 Series
Märzhäuser Scan IM Series
Olympus K-Frame Opening (160x110mm)
Physik Instrumente M-687 PILine
PRIOR H107
ES107
Thorlabs MLS203-1/MLS203-2
Zeiss Scanning Stage 130 x 85 mot. P
K-Frame Opening (160x110mm)

The ibidi Heating Systems, Multi-Well Plates, only require a > 1 mm working distance for multi-well plates with coverslip bottom, e.g., ibidi µ-Plate 96 Well.

Components of the ibidi Heating & Incubation Systems, Multi-Well Plates

ibidi Temperature Controller

  • Provides excellent temperature stability within the incubation chamber
  • Four control channels allow to connect a heated plate, a heated lid, and two additional heated components (e.g., an objective heater)

Technical Features:

  • Temperature stability: ± 0.05 °C
  • Temperature uniformity across the insert: ± 0.5 °C
  • Temperature range: Room temperature – 45 °C
  • Control channels: 4
  • TempControl software for remote control and data recording included
  • External temperature sensor included
  • Adjustable alarm function included
  • Analog output for extreme noise reduction optional

Heated Plate with Heated Glass Bottom, Multi-Well Plates

  • To be used with K-Frame-Stages or the Nikon Ti-S-E and Ti-S-ER Motorized Stage which holds multi-well plates
  • For low magnification only (working distance > 1mm)
  • Suitable for DIC
  • For use with multi-well plates

Heated Glass Lid, Multi-Well Plates

  • For use with CO2, O2, and humidity to provide a complete environmental chamber
  • Independently controlled glass lid prevents the formation of condensed water on the lid of the microscopy chamber or plate
  • No scattering of light or shadow formation

Optional: µ-Dish Microscopy Rack

  • A microscopy rack for perfect µ-Dish stabilization
  • Adaptable with the ibidi Heating System, Multi-Well Plates
  • Compatible with all inverted microscopes
  • Lids fixed with magnetic positioning for additional stabilization

Optional: µ-Slide Microscopy Rack

  • A microscopy rack for perfect µ-Slide stabilization
  • Adaptable with the ibidi Heating System, Multi-Well Plates
  • Compatible with all inverted microscopes
  • Lids fixed with magnetic positioning for additional stabilization

Gas Mixer for the Incubation Unit

The heated lid also comes with a gas inlet. The ibidi Gas Incubation System upgrades the ibidi Heating System to a complete stage top incubator for all live cell imaging applications, including high resolution, TIRF, and confocal microscopy.

The ibidi Gas Incubation System is suitable for various experimental conditions (e.g., pH or hypoxia). It is available in two versions: Gas Mixer for CO2, Gas Mixer for CO2 and O2.

Overview of the Heating and Incubation System for Multi-Well Plates

Special Solutions

You can also obtain additional customer-specific solutions upon request.